Products

Comprehensive solutions for the X-ray room

  1. Home
  2. Products
  3. Equipment
  4. Phantoms

Phantoms

RaySafe P Fluoro Phantom
RaySafe Pro-CT Dose Phantom
RaySafe Pro-Digi Radiography Phantom
RaySafe Nested Adult Head and Body CTDI Phantom
RaySafe P 3D Fluoro Phantom
P Fluoro Phantom table
RaySafe Pro-Digi Radiography Phantom Kit
RaySafe P Fluoro Phantom
RaySafe Pro-CT Dose Phantom
RaySafe Pro-Digi Radiography Phantom
RaySafe Nested Adult Head and Body CTDI Phantom
RaySafe P 3D Fluoro Phantom
P Fluoro Phantom table
RaySafe Pro-Digi Radiography Phantom Kit

RaySafe offers a wide choice of phantoms for different applications. These phantoms are a great complement to the RaySafe X2, Xi, Solo and ThinX instruments for performing image quality on digital and analog radiography and fluoroscopic x-ray systems.

RaySafe P Fluoro Phantom
Get pricing on RaySafe products

RaySafe P Fluoro Phantom

The RaySafe P Fluoro phantom is made for acceptance and constancy tests of digital and analogue radiography and fluoroscopy equipment. It is suitable for routine quality checks on over couch tubes, under couch tubes and C arms. The tests supported include: collimation and beam alignment, spatial resolution, contrast resolution, homogeneity, and dynamic range.


RaySafe Pro-CT Dose Phantom
Get pricing on RaySafe products

Raysafe Pro-CT Dose Phantom

The Raysafe Pro-CT Dose phantom is designed to simulate pediatric and adult heads and bodies. The three piece phantom is used primarily for computed tomography dose index (CTDI) measurements essential within your CT quality control program. The nested phantom module design allows for size adjustment depending on what protocol is in use.


RaySafe Pro-Digi Radiography Phantom
Get pricing on RaySafe products

RaySafe Pro-Digi Radiography Phantom

The RaySafe Pro-Digi Radiography phantom is a multi-functional phantom designed for digital radiography equipment constancy tests. It is used for analyzing beam alignment, dynamic range, contrast resolution, spatial resolution, and homogeneity. The versatility of the phantom enables to bring only this phantom for the image quality check and it also reduces amount of exposures and time spent while performing the needed tests. The phantom complies with the standards IEC 61223-3-1, DIN 6868-58 and DIN 6868-13.


RaySafe Nested Adult Head and Body CDTI Phantom
Get pricing on RaySafe products

RaySafe Nested Adult Head and Body CTDI Phantom

Features a set of two nested homogenous cylinders designed to image adult head and body. Used primarily for CTDI measurement and to separate dose information for each. When performing dose profile measurements, dose phantoms allow to collect information for the maximum, minimum and mid-range value of the nominal tomographic section thickness. The two parts are frosted with white lines to simplify the alignment at setup. It is delivered in a wheel carried, heavy duty Storm Case with additional space for an Xi Base unit, Xi CT detector and Xi R/F detector.


RaySafe P 3D Fluoro Phantom
Get pricing on RaySafe products

RaySafe P 3D Fluoro Phantom

The RaySafe P 3D Fluoro phantom is used to test the cone beam functionality of fluoroscopic x-ray systems. After carrying out image quality test on 2D image acquisition with the RaySafe P Fluoro phantom (item no 1921051), you evaluate the 3D capability of 3D reconstruction module.

Contact person

Raysafe solutions

Accurate, easy to use x-ray imaging preventative maintenance solutions for diagnostic x-ray equipment.