Comprehensive solutions for the X-ray room

  1. Home
  2. Products
  3. Equipment
  4. RaySafe X2

RaySafe X2

RaySafe X2
RaySafe X2
RaySafe X2
RaySafe X2
RaySafe X2
RaySafe X2
RaySafe X2
RaySafe X2
RaySafe X2
RaySafe X2

At your fingertips

Get pricing on RaySafe products

We’ve grown accustomed to intuitive interactions with our devices. After all, it’s not the device that’s most important, but what you can achieve with it that matters. Simplicity has always been a hallmark for RaySafe. But simplicity on the outside requires a lot of work on the inside. Our simplicity comes from a careful balance of advanced sensor technology paired with electronic wizardry and intelligent signal processing. The result – a device that provides accurate measurements with the ultimate in user friendliness. Right at your fingertips.


Less effort. More insight.

Life is busier. There are more demands on your time. So you need to remove the unnecessary steps in taking a measurement. Like positioning the sensor, choosing a setting, or interpreting the results. Fortunately, the X2 R/F sensor is orientation independent so the only thing you need to do is to place it in the X-ray beam and turn on the instrument. The rest is automatic – no menus, no selections.


Full range measurements

Ease-of-use means you get everything you need in one exposure, with one sensor – automatically. The RaySafe X2 offers sensors for R/F, MAM, CT, Survey, and even light applications. Choose the sensors you need and add the ones you will need at a later stage. The X2 sensors are made without the need to select ranges or special modes. Most sensors also measure waveforms that can be analyzed directly on the base unit.


Intuitive interface and first-class precision

The RaySafe X2 sensors and electronics are specifically designed to minimize the need for user interaction. A groundbreaking concept in sensor design and circuitry provides unsurpassed accuracy, reproducibility and sensitivity. Intelligent algorithms clearly indicate when a parameter is outside its specified range.

Finally, a built-in, self-test system ensures your system is in complete working order. This provides added peace of mind and further assures accurate measurements the first time and every time.


Finding your way

All exposure data are saved in the X2 Base Unit. In each session, you can swipe to view measurement data from previous exposures for reference or comparison. A full session of measurements can easily be uploaded onto a PC at a later stage with help of the X2 View software.

The RaySafe X2 touch screen interface allows the user to view data in a comprehensive yet flexible way. The home screen displays every available parameter from the attached sensor. To zoom in on any parameter, just tap it for a larger view. Use a quick swipe to display waveforms, and pinch to zoom into details. Navigation is made simple by using common Menu, Home and Back keys. All exposures are saved in the base unit. In each session, you can swipe to  quickly go back to previous exposures for reference or comparisons. A full session of measurements can be uploaded to the X2 View software at a later stage for more manipulation.


RaySafe X2

RaySafe X2

Measurement of 1 – 12 parameters simultaneously with waveform overlay.
Large view of selected parameter.

RaySafe X2


RaySafe X2

Overview and simple analysis of kVp, dose rate or mA.
Smart algorithms easily identify and display the correct mA.

Get pricing on RaySafe products

The RaySafe X2 offers a wide choice of sensors for different applications. While the X2 Prestige contains all sensors it is also possible to start with a dedicated system and grow the system over time. As the
X2 sensors stores calibration data as well as necessary firmware the addition of a new sensor is a very simple process – just plug it in and you are ready to go! Read more about the different sensors below:

  • X2 R/F Sensor

    – no selections, no corrections

    – orientation independent

    – small footprint

  • X2 MAM Sensor

    – dose and HVL for all beam qualities – without corrections

    – orientation independent

    – stacked sensor technology prevents the influence of the heel effect

  • X2 CT Sensor

    – pencil chamber including electrometer

    – built-in temperature and pressure corrections

    – dose, time and waveforms

  • X2 Survey Sensor

    – lightweight with fast response time

    – high precision in the X-ray range

    – dose, rate, mean energy and waveforms

  • X2 Light Sensor

    – luminance and illuminance Class B sensor

    – durable housing

    – dual acquisition keys

X2 Software

When working with the RaySafe X2, you have multiple options for PC software that makes your X2 even more powerful:

  • OneQA™ Workflow Automation Software* – This robust workflow automation solution pairs seamlessly with your X2 to help simplify the management of your Quality Assurance program by enhancing productivity and helping you achieve compliance. Learn more about OneQA™ software and sign up for your free trial (U.S. only)
  • X2 View – Can be used as an extended display of the base unit or as a tool for further data analysis. X2 View also connects to Microsoft Excel. Download the latest version of the software X2 View. 
*OneQA™ software is available for trial and purchase in the United States only.

RaySafe X2

Access all product support material

Product Leaflet

RaySafe X2


Specification Leaflet

RaySafe X2 Specification


Quick Guide

RaySafe X2 Quick Guide


Product Accessories

Accessories for RaySafe X2, RaySafe Xi and RaySafe Solo



X2 View


Excel Templates

Sample Pack


EU Declaration of Conformity

RaySafe X2 System

Contact us


Please contact us for more information.


Related content